AASTRA 4224 Operator for MX-ONE User Guide - Manual (Page 37)

37 Dialog 4224 Operator
Extending
Announce call
If you want to announce the call before extending (the terminal
must be in manual extending mode). z
Dial the extension number.
The right side of the display shows
EXTENSION
and the called
extension’s number and name.
Speech >
Ò
Press.
Speech > key lamp is switched on and the terminal rings the
extension.
Note: If the called extension is in a private network, there is
no need to press the Speech > key to call, as it is done
automatically.
When the called party answers,
ANSWER
is shown.
Announce the call.
Note: System dependent, the calling party can listen to the
announcement.
ê
Press to extend the call.
The call is extended and the terminal is cleared.
Retrieve a call
It is possible to retrieve an extended call before it has been
answered, e.g. if you dialed a wrong number. Ò
< Clear Press.
You can also press the Clear > key. The display shows the data of
the extended call.
To correct the number:
Clear >
Ò
Press.
Proceed to extend the call as normal.