AASTRA 6700i for OpenCom 1000 User Guide EN - Manual (Page 41)

Configuring the Aastra 673xi / 675xi
37
Note
The OpenCom 1000 communications system provides a TFTP server for
configuring Aastra 673xi / 675xi telephones. You can determine the IP address of
this server in the OCE. In the Network directory select the Connections page.
Find the connection used for the Aastra 673xi / 675xi. The IP address for the
connection entry that you are looking for appears in the TFTP Server column.
6. Close the Configuration Server menu card with the Done softkey. Refuse the
restart query with the Cancel softkey.
7. In the Administrator Menu menu card select the 2.Network Settings option.
Go to the 1.DHCP Settings: DHCP menu page. Use the Change softkey to
change the setting to No. Confirm using the Done softkey. In addition, on the
menu pages 2.IP Address and 3.Subnet Mask enter the desired address
configuration manually.
The network configuration entered manually is used after the next restart of the
Aastra 673xi / 675xi. Then the Aastra 673xi / 675xi loads files from the TFTP server
of the communications system. Then if necessary the firmware version of the
Aastra 673xi / 675xi is changed to a version suitable to the communications
system. In addition, the Aastra 673xi / 675xi loads and activates the configuration
specified by the communications system.
Aastra 673xi / 675xi Passwords
Certain functions of the Aastra 673xi / 675xi can only be accessed via password for
security reasons:
■ Login of the Aastra 673xi / 675xi: Under Callno./ID enter your call number.
Under PIN enter the password the administrator of the OpenCom 1000
communications system has provided you (please refer to Flexible Workstation
starting on page 25).
■ Web Configurator of the OpenCom 1000 (OCW): In the password dialogue of
the Web browser enter the user name connected with your call number. The
user name is usually identical with your call number. Enter the password that
the administrator of the OpenCom 1000 communications system gave you.
(please refer to the Web Configurator of the OpenCom 1000 starting on
page 28).
■ Local settings on the telephone: The factory settings password is “22222”.
After the first log in of the Aastra 673xi / 675xi onto the OpenCom 1000
communications system this password is overwritten by the OpenCom 1000
communications system for security reasons.