AASTRA 6700i for OpenCom 1000 User Guide EN - Manual (Page 38)

Configuring the Aastra 673xi / 675xi
34
3. Select the 6.Restart Phone menu entry. Confirm with the right arrow key
or with the Select softkey.
4. Confirm the restart query with the Restart softkey.
The Aastra 673xi / 675xi starts and is quickly ready for operation once again.
Deleting a Local Configuration
It is possible that programming of function keys via the personal Web Configu-
rator (OCW) is deactivated by previous local programming via the Web Interface of
the Aastra 673xi / 675xi. This can make it necessary to delete the local configu-
ration of the Aastra 673xi / 675xi.
Note
The operation is analogous on the Aastra 6730i / 6731i and on the Aastra 6751i /
6753i. The key assignment is proposed on the bottom display line.
1. Press the Options key (or the Service key on the Aastra 6751i).
The Options List menu card appears.
2. Use the navigation keys to select the 2.Phone Status menu entry. Confirm
with the right arrow key or with the Select softkey.
The Phone Status menu card appears.
3. Use the navigation keys to select 8.Erase Local Config menu entry.
Confirm with the right arrow key or with the Select softkey.
The display shows Please enter the administrator password.
4. Enter the administrator password with the number keys (please refer to
Aastra 673xi / 675xi Passwords starting on page 37). Confirm with the right
arrow key
or with the Enter softkey.
5. Confirm the display Erase local config? with the Delete softkey.
Restoring Factory Settings
It is possible that you have been operating the Aastra 673xi / 675xi with another
communications system or with an Internet SIP provider. To operate the
Aastra 673xi / 675xi with the OpenCom 1000 communications system, you should
restore factory settings.