AASTRA 6700i for OpenCom 1000 User Guide EN User Manual

Page 11

Aastra 673xi / 675xi SIP Telephones

With the Aastra 6755i and Aastra 6757i models the administrator of the
OpenCom 1000 communications system can configure the function and labelling
of the softkeys next to the main display in four key levels. Press the More softkey
(lower right) multiple times to reach the key level desired. With the Aastra 6757i
model the upper softkeys can be configured in two levels.

Trunk keys: connect you to a specific line or accept a
call which is signalled on the line.

Handsfree key: activates the Handsfree for making
and receiving calls without picking up the handset.
When a headset is connected, a call can be accepted
and ended using this key.

Mute key: turns the microphone on or off.

Navigation keys: press the arrow keys up or down to
navigate within a menu or on a menu page.

The left or right arrow key switches the line shown as
the default.

Press the left arrow key to exit a menu or menu page.
Press the right arrow key to select a menu selection
or menu page option displayed.

Function keys: the function of these keys is
configured with the OpenCom 1000
communications system. Keys are labelled either on a
paper strip or via the display depending on the
model.

Next to each function key there is an LED indicator to
show what function is in use.

Softkeys (Aastra 6755i and Aastra 6757i only): the
function of these keys is configured with the
OpenCom 1000 communications system. The
labelling is via the display.

The function and labelling of the softkeys changes
depending on call state, for example when called or
when talking.

Next to each softkey there is an LED indicator to show
what function is in use.

Aastra 6753i, Aastra 6755i and Aastra 6757i

Keys

Key Description and Function

Call forw.

Ph.book