AASTRA 6700i for OpenCom 1000 User Guide EN - Manual (Page 22)

Using the Aastra 673xi / 675xi
18
3. In the Key type field select the Speed dial entry. In the Label field you can
enter a text for labelling the key on the display of your telephone. In the Call
no. field you enter the call number to be saved to this function key. In the Line
field select the line to be seized when the call number is dialled or accept the
default.
4. Click on the Accept button to save programming.
Changing or deleting a speed dialling destination
Do the following to delete a programmed speed dialling destination:
1. To do so, start the OCW and open the configuration dialogue for your
Aastra 673xi / 675xi (please refer to the chapter Web Configurator of the
OpenCom 1000 starting on page 28).
2. Click on the desired key entry in the Key column of the Programmable keys
on terminal / Softkeys on terminal table.
The dialogue for configuring this key opens. You see the current key
configuration.
3. To change programming, change the entries in the fields Label, Call no. and
Line.
To delete programming, select the entry - in the Key type field. All
configuration settings are now removed and no longer appear on the display.
4. Click on the Accept button to save changed or deleted programming.
Speed Dialling with Number Keys
Select speed dialling destination
■ Pick up the handset. Press the number key where the desired call number is
saved for a few seconds.
alternatively – when you wish to call in the handsfree mode:
■ Press the number key – with the handset down – where the speed dialling
destination is programmed.
Configuring a speed dialling destination
You can configure the number keys as speed dialling keys directly on your
Aastra 673xi / 675xi:
1. Press one of the number keys for a few seconds.
Aastra 6755i / 6757i: The display shows the Enter Number: menu card.