AASTRA 6700i for OpenCom 1000 User Guide EN - Manual (Page 32)

Configuring the Aastra 673xi / 675xi
28
1. Press the Options key (or the Service key on the Aastra 6751i).
The Options List menu card appears.
2. Confirm the 1.Preference menu entry with the right arrow key or with the
Select softkey.
3. Go to the desired setting (please refer to The Options Menu starting on
page 38 and change the setting or the option. Confirm using the Done softkey.
4. Press the Goodbye key to exit the menu.
Web Configurator of the OpenCom 1000
When the system administrator given you authorisation to use the Web Configu-
rator of the OpenCom 1000 (OCW) you can do the configuration of the terminal
function keys using a Web browser yourself.
1. Enter the IP address or the DNS name of the OpenCom 1000 communications
system in the address line of the Web browser. Get the IP address from the
administrator of the OpenCom 1000 communications system – this IP address
is not identical with the IP address of your Aastra 673xi / 675xi.
2. Confirm with the enter key to call the login page of the OpenCom 1000
communications system.
3. Enter the user name and password that the administrator of the
OpenCom 1000 communications system gave you. Confirm using the OK
button.
4. Click on the My data and terminals link. Click on the link next to the
Terminals entry.
The configuration dialogue for your Aastra 673xi / 675xi opens.
5. In the configuration dialogue of the Aastra 673xi / 675xi click on one of the
links under the Programmable keys on terminal / Softkeys on terminal
header.
The corresponding key configuration dialogue opens. Select the desired
function under the key type. Enter the additional information necessary for the
function. Confirm the key configuration with the Accept button.