American Magnetics 4Q1005PS-430 Integrated Power Supply System - Manual (Page 136)

118 Rev. 5
Remote Interface Reference
SETUP Configuration Commands and Queries
•
LOCK:FIELD-CURRent?
Returns “0” for use of the FIELD <> CURRENT SHIFT-key command
unlocked, or “1” for locked.
•
CONFigure:LOCK:FIELD:UNITS {0|1}
Specifies whether the Field Units value is locked or unlocked (whether
accessed through the FIELD UNITS SHIFT-key menu or under the Misc
submenu). Sending “0” unlocks. A “1” locks. “0” is the default value.
•
LOCK:FIELD:UNITS?
Returns “0” for Field Units value unlocked, or “1” for locked.
•
CONFigure:LOCK:STABility {0|1}
Specifies whether the Stability Setting value is locked or unlocked
(whether accessed through the STAB. SHIFT-key menu or under the Load
submenu). Sending “0” unlocks. A “1” locks. “0” is the default value.
•
LOCK:STABility?
Returns “0” for Stability Setting value unlocked, or “1” for locked.
•
CONFigure:LOCK:VOLTage:VS-VM {0|1}
Specifies whether use of the Vs <> Vm SHIFT-key command is locked or
unlocked. Sending “0” unlocks. A “1” locks. “0” is the default value.
•
LOCK:VOLTage:VS-VM?
Returns “0” for use of the Vs <> Vm SHIFT-key command unlocked, or “1”
for locked.
•
CONFigure:LOCK:VOLTMeter {0|1}
Specifies whether use of the VOLT METER SHIFT-key command is locked
or unlocked. Sending “0” unlocks. A “1” locks. “0” is the default value.
•
LOCK:VOLTage:VOLTMeter?
Returns “0” for use of the VOLT METER SHIFT-key command unlocked, or
“1” for locked.
•
CONFigure:LOCK:FINEadjust {0|1}
Specifies whether use of the FINE ADJUST SHIFT-key command is locked
or unlocked. Sending “0” unlocks. A “1” locks. “0” is the default value.
•
LOCK:VOLTage:FINEadjust?
Returns “0” for use of the FINE ADJUST SHIFT-key command unlocked,
or “1” for locked.