American Magnetics 12200PS DC Power Supply (CE-Marked) - Manual (Page 11)

FEATURES AND SPECIFICATIONS OPERATING MANUAL
1-2 Release 1.0 (98/07)
1.3 Specifications
1.3.1 Electrical Specifications
These specifications are warranted over a temperature range of 0°C to 50°C. Nominal ambient temperature
assumed is 25°C. Nominal line voltage is 208Vac, 60Hz. Table 1.3-1 and Table 1.3-2 post maximum values for
model-dependent specifications. Specifications are subject to change without notice.
Table 1.3-1 Specifications for 7.5V to 60V Models
Models 7.5-300 12-220 20-130 40-70 60-46
Output Ratings: Output Voltage 1
Output Current
Output Power
0-7.5V
0-300A
2250W 0-12V
0-220A
2640W 0-20V
0-130A
2600W 0-40V
0-70A
2800W 0-60V
0-46A
2760W
Line Regulation: 2
Voltage (0.01% of Vmax + 2mV)
Current (0.01% of Imax + 2mA)
2.75mV
32mA 3.2mV
24mA 4mV
15mA 6mV
9mA 8mV
6.6mA
Load Regulation: 3
Voltage (0.02% of Vmax + 5mV)
Current (0.02% of Imax + 5mA) 6.5mV
65mA 7.4mV
49mA 9mV
31mA 13mV
19mA 17mV
14.2mA
Meter Accuracy:
Voltage (1% of Vmax + 1 count)
Current (1% of Imax + 1 count) 0.09V
4A 0.13V
2.3A 0.3V
1.4A 0.5V
0.8A 0.7V
0.56A
Output Noise (0-20MHz): Voltage (p-p) 100mV 100mV 100mV 150mV 150mV
Output Ripple (rms): Voltage
Current
4
10mV
1600mA 10mV
1200mA 10mV
400mA 15mV
200mA 15mV
100mA
Drift (30 minutes): 5
Voltage (0.05% of Vmax)
Current (0.6% of Vmax)
For Resistive Programming:
Voltage (0.6% of Vmax)
Current (0.6% of Imax)
3.75mV
1800mA
45mV
1800mA
6mV
1320mA
72mV
1320mA
10mV
780mA
120mV
780mA
20mV
420mA
240mV
420mA
30mV
276mA
360mV
276mA
Drift (8 hours): 6
Voltage (0.05% of Vmax)
Current (0.05% of Imax)
For Resistive Programming:
Voltage (0.3% of Vmax)
Current (0.3% of Imax)
3.75mV
150mA
22.5mV
900mA
6mV
110mA
36mV
660mA
10mV
65mA
60mV
390mA
20mV
35mA
120mV
210mA
30mV
23mA
180mV
138mA
Temperature Coefficient: 7
Voltage (0.02% of Vmax/°C)
Current (0.03% of Imax/°C)
For Resistive Programming:
Voltage (0.06% of Vmax/°C)
Current (0.06% of Imax/°C)
1.5mV
90mA
4.5mV
180mA
2.4mV
66mA
7.2mV
132mA
4mV
39mA
12mV
78mA
8mV
21mA
24mV
42mA
12mV
13.8mA
36mV
28mA
OVP Adjustment Range:
(5% to 110% of Vmax) 0.375-8.25V 0.6-13.2V 1-22V 2-44V 3-66V
Efficiency: 8 0.80 0.82 0.85 0.87 0.90
1 Minimum output voltage is <0.15% of rated voltage at zero output setting.
2 For input voltage variation over the AC input voltage range, with constant rated load.
3 For 0-100% load variation, with constant nominal line voltage.
4 Current mode noise is measured from 10% to 100% of rated output voltage, full current.
5 Maximum drift over 30 minutes with constant line, load, and temperature, after power on.
6 Maximum drift over 8 hours with constant line, load, and temperature, after 30-minute warm-up.
7 Change in output per
°
C change in ambient temperature, with constant line and load.
8 Typical efficiency at nominal input voltage and full output power.