beautypg.com

Dell UPS 10000R User Manual

Page 21

background image

19

Installation and Startup

|

Removing the Terminal Block Cover

Terminal Block

Cover

Knock-out Hole

1

Switch off utility power at the distribution point where the UPS will be connected. Be absolutely

sure there is no power.

2

Remove the terminal block cover (two screws) and retain.

3

Remove the knock-out hole in the terminal block cover for the input conduit. The hole must

accommodate 1” or 1.5” (25.4 mm or 38.1 mm) Intermediate Metal Conduit (IMC).

See also other documents in the category Dell Computer hardware: