Dell UPS 10000R - Manual (Page 24)

22 |
Installation and Startup
Starting the UPS
On/Off Button
To start up the UPS:
1 Verify that the internal batteries are connected.
2 If an optional EBM is installed, verify that the EBM is connected to the UPS. Refer to the Dell
Online Rack EBM 10 kW Getting Started Guide for more information.
3 Verify that all load segment circuit breakers are in the ON position.
4 Switch the main utility breaker on.
The UPS LCD panel display illuminates. The Dell startup screen changes to the UPS status
summary screen. The UPS front panel display shows the flashing Standby icon .
5 Press the On/Off button on the UPS front panel.
After the startup is complete, the status changes according to the UPS operating mode.