Bosch GKE 35 BCE Professional - Manual (Page 23)

English | 23
Bosch Power Tools 1 609 929 V11 | (23.8.11)
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The power tool is intended for sawing wood such as wooden
beams, planks, branches, tree trunks, etc., and for sawing of
trees. Cuts can be sawed with or across the grain.
Delivery Scope
Carefully remove the power tool from its packaging and check
if the following parts are complete:
– Chain saw
– Cover
– Chain
– Chain bar
– Chain guard
– Operating instructions
When parts are missing or damaged, please contact your
dealer.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Rear handle (insulated gripping surface)
2 Lock-off button for On/Off switch
3 On/Off switch
4 Oil filler cap
5 Activation lever for kickback brake (hand guard)
6 Front handle (insulated gripping surface)
7 Deactivation mark “for kickback brake”
8 Nose sprocket
9 Chain guard
10 Saw chain
11 Chain bar
12 Gripping teeth
13 Chain-tensioning ring (red)
14 Locking knob
15 Cover
16 Serial number
17 Symbol for rotation and cutting direction
18 Drive sprocket
19 Oil outlet
20 Guide fin for chain bar
21 Fastening bolt
22 Chain tensioning catch
23 Chain catch bolt
24 Oil level gauge
25 Reset button for thermal safety switch
26 Red dot
27 Protective lid of chain-tensioning mechanism
Accessories shown or described are not part of the standard deliv-
ery scope of the product. A complete overview of accessories can
be found in our accessories program.
Technical Data
Chain saw GKE 35 BCE
Professional
GKE 40 BCE
Professional
Article number 0 601 597 6.. 0 601 597 7..
Rated power input W 2100 2100
Chain speed (no-load)* m/s 12 12
Chain bar length cm 35 40
Braking duration of the kickback brake s <0.1 <0.1
Braking duration of the run-down brake s <1 <1
Chain pitch mm
(")
9.525
(3/8)
9.525
(3/8)
Drive link thickness mm 1.3 1.3
Amount of drive links 52 57
Oil reservoir capacity ml 200 200
Automatic chain oiler z z
Toolless chain tensioning (SDS) z z
Overload Protection z z
*limited via electronic control
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary.
OBJ_BUCH-716-004.book Page 23 Tuesday, August 23, 2011 3:50 PM