Garmin GPSMAP 60CSx User Manual

Page 108

GPSMAP 60CSx Owner’s Manual

PPendIx

orAn

Loran TD Setup

To set up Loran TD from the Setup Menu:

1. Press

MENU twice to open the Main Menu.

2. Use the

ROCKER to highlight the Setup icon,

and press

ENTER to open the Setup Menu.

3. Use the

ROCKER to highlight the Units icon,

and press

ENTER to open the Units Setup

Page.

4. Highlight the Position Format field, and press

ENTER to open the format list.

5. Highlight

Loran TD, and press ENTER to open

the Loran Setup Page.

6. To change the settings of any of the five fields,

highlight the field, press

Enter to select from

options or enter the setting data.

7. When finished, highlight the

Save button, and

press

ENTER.

If the active GRI Chain, secondary stations, or offsets

have been changed since the waypoint was created,

the waypoint references the active GRI-chain and

secondary stations and adjust the TD coordinates

accordingly. Remember that the GPSMAP 60CSx

is not relying on the LORAN signal for navigation

and actually converts the TD coordinate to a needed

latitude and longitude coordinate before storing

the waypoint to memory or using it for navigation.

Because of this, the unit can navigate to a TD

coordinate anywhere in the world.
You must know your GRI chain number and

secondary stations to create a LORAN TD position.

For more information, read our LORAN TD Position

Format Handbook, available on the Garmin Web site,

at www.garmin.com/support/userManual.jsp.

Loran TD Setup Page