Garmin GPSMAP 7215 User Manual
Page 82
76
GPSMAP
®
6000/7000 Series Owner’s Manual
Radar
Enabling Timed Transmit
From the Home screen, select
Radar
>
Sentry
>
Menu
>
Sentry Setup
>
timed Xmit
>
on
.
Setting the Standby and Transmit Times
You must enable timed transmit before you can set the standby and transmit times (
).
To help conserve power, you can indicate the radar standby time and the transmit time to implement periodic
radar signal transmissions at set intervals.
1. From the Home screen, select
Radar
>
Sentry
>
Menu
>
Sentry Setup
.
2. Select
Stdby time
.
3. Enter the time interval between radar signal transmissions:
• For the GPSMAP 6000 series, use the Rocker or the Numeric Keypad.
• For the GPSMAP 7000 series, use the on-screen keyboard.
4. Select
Done
.
5. Select
Xmit time
.
6. Enter the length of each radar signal transmission:
• For the GPSMAP 6000 series, use the Rocker or the Numeric Keypad.
• For the GPSMAP 7000 series, use the on-screen keyboard.
7. Select
Done
.
Enabling a Guard Zone
From the Home screen, select
Radar
>
Sentry
>
Menu
>
Sentry Setup
>
enable Guard Zone
.
Defining a Partial Guard Zone
You must enable a guard zone before you can define the boundaries of the zone (
You can define the boundaries of a guard zone that does not completely encompass your boat.
1. From the Home screen, select
Radar
>
Sentry
>
Menu
>
Sentry Setup
>
Adjust
Guard Zone
>
Move Guard Zone
>
Corner 1
.
2. Adjust the location of the guard-zone corner:
• For the GPSMAP 6000 series, use the Rocker and the on-screen arrows (
and ).
• For the GPSMAP 7000 series, touch the guard-zone corner and drag.
3. Select
Corner 2
and repeat step 2 to adjust the location of the second corner of the
guard zone.
4. Select
Done
.
Defining a Circular Guard Zone
You must enable a guard zone before you can define the boundaries of the zone (
You can define a circular guard zone that completely encompasses your boat.
1. From the Home screen, select
Radar
>
Sentry
>
Menu
>
Sentry Setup
>
Adjust Guard Zone
>
Move
Guard Zone
>
Circle
.
2. Select
Menu
>
Sentry Setup
>
Adjust Guard Zone
>
Move Guard Zone
>
Corner 1
.
Corner 1
Corner 2