Garmin GPSMAP 7215 User Manual
Page 24
18
GPSMAP
®
6000/7000 Series Owner’s Manual
Charts and 3D Chart Views
4. Select
time to
to sound an alarm if AIS or MARPA determines that a target will intersect the safe zone
within the defined time interval (ranging from 1 to 24 minutes).
5. Select a time.
Viewing a List of AIS and MARPA Threats
Note: The Fishing chart and Mariner’s Eye 3D are available with a preprogrammed BlueChart g2 Vision
data card.
1. From the Home screen, select
Charts
.
2. Select
Navigation Chart
,
Fishing Chart
,
Perspective 3D
, or
Mariner’s eye 3D
.
3. Select
Menu
>
other Vessels
>
List
>
Show
.
4. Select the type of threats to include in the list (All threats, MARPA threats only, or AIS threats only).
Making a Call to an AIS Target
See “Making an Individual Routine Call to an AIS Target (
).
About AIS Search and Rescue Transmitters
AIS Search and Rescue Transmitters (AIS-SART, or SART) are self-contained devices that transmit
emergency position reports when activated. SART transmissions are different than standard AIS transmissions,
so they appear differently on the chartplotter. Instead of tracking a SART transmission for collision avoidance,
you track a SART transmission to locate and assist a vessel.
Navigating to a SART Transmission
When you receive a SART transmission, a distress signal alarm appears.
Select
Review
>
Go to
to begin navigation to the SART transmision.
AIS-SART Targeting Symbols
Symbol
Description
AIS-SART transmission� You can select this symbol to see more information about the SART
transmission and begin navigation�
AIS-SART transmission lost�
AIS-SART transmission test� This symbol appears when a vessel initiates a test of their SART
device, and does not represent a true emergency� You can disable these test symbols and
alerts�
AIS-SART transmission test lost�
Enabling AIS-SART Transmission Test Alerts
In order to avoid a large number of test alerts and symbols in crowded areas such as marinas, AIS-SART test
alerts ignored by default. To test an AIS SART device, you must enable the chartplotter to receive test alerts.
From the Home screen, select
Configure
>
other Vessels
>
AIS SARt test
.