Garmin GPSMAP 7215 - Manual (Page 31)

GPSMAP ® 6000/7000 Series Owner’s Manual 25
Charts and 3D Chart Views
Fishing Chart
Use the Fishing chart for a detailed view of the bottom contours and depth soundings on the chart.
Fishing Chart Navigation Chart
The Fishing chart uses detailed bathymetric data on a preprogrammed BlueChart g2 Vision data card, and is
best for offshore deep-sea fishing.
Fishing Chart Appearance
Using Waypoints
See “Waypoints” ( page 34 ).
Using Tracks
See “Tracks” (page 39 ).
Showing Other Vessels
See “Configuring the Appearance of Other Vessels” ( page 66 ).
Showing Navaids
From the Home screen, select Charts > Fishing Chart > Menu > Navaids > on .
Showing Data Bars
See “Data Bars” ( page 62 ).
Showing Satellite Imagery on the Navigation Chart
You can overlay high-resolution satellite images on the land, on the sea, or on both portions of the Navigation
chart when using a preprogrammed BlueChart g2 Vision data card.
Note: When enabled, the high-resolution satellite images are only present at lower zoom levels. If you
cannot see the high-resolution images in your BlueChart g2 Vision region, you can zoom in further by
selecting the Range ( + ) key (GPSMAP 6000 series) or the button (GPSMAP 7000 series). You also can
set the detail level higher by changing the map zoom detail ( page 11 ).
1. From the Home screen, select Navigation Chart > Menu > Chart Setup > Photos .
2. Complete an action:
• Select Land only to show standard chart information on the water, with photos overlaying the land.
• Select Photo Map to show photos on both the water and the land at a specified opacity. Select and
hold Up or Down to adjust the photo opacity. The higher you set the percentage, the more the satellite
photos cover both land and water.