ASRock Z77 Extreme6__TB4 - Manual (Page 36)

36
ASRock Z77 Extreme6/TB4 Motherboard
2.13 Onboard Headers and Connectors
Onboard headers and connectors are NOT jumpers. Do NOT place
jumper caps over these headers and connectors. Placing jumper caps
over the headers and connectors will cause permanent damage of the
motherboard!
Serial ATA2 Connectors These four Serial ATA2 (SATA2)
(SATA2_2_3: see p.2, No. 13) connectors support SATA data
(SATA2_4_5: see p.2, No. 14) cables for internal storage
devices. The current SATA2
interface allows up to 3.0 Gb/s
data transfer rate.
Serial ATA3 Connectors These four Serial ATA3 (SATA3)
(SATA3_A1_A2: see p.2, No. 11) connectors support SATA data
(SATA3_0_1: see p.2, No. 12)
cables for internal storage
devices. The current SATA3
interface allows up to 6.0 Gb/s
data transfer rate. If the eSATA3
port on the rear I/O has been
connected, the internal
SATA3_A2 will not funtion.
Serial ATA (SATA) Either end of the SATA data
Data Cable cable can be connected to the
(Optional) SATA / SATA2 / SATA3 hard
disk or the SATA2 / SATA3
connector on this motherboard.
SA
TA2_4 SA
TA2_2
SA
TA2_5 SA
TA2_3
SA
TA3_0 SA
TA3_A1
SA
TA3_1 SA
TA3_A2
USB 2.0 Headers Besides two default USB 2.0
(9-pin USB2_3) ports on the I/O panel, there are
(see p.2, No. 25)
three USB 2.0 headers on this
motherboard. Each USB 2.0
header can support two USB 2.0
ports.
English