Acura 2011 TSX - Manual (Page 71)

69
In
st
ru
m
en
t P
an
el
Indicators
Continued
Indicator Name On/Blinking Explanation Message
System Message
Indicator
• Comes on along with a beep when
a problem is detected. A system
message on the multi-information
display appears at the same time.
• While the indicator is on, press the
(information) button to see
the message again.
• Refer to the Indicators information in
this chapter when a system message
appears on the multi-information
display. Take the appropriate action
for the message.
• The multi-information display does
not return to the normal screen
unless the warning is canceled, or the
button is pressed.
—
Turn Signal
Indicators
• The turn signal indicators blink
when you operate the turn signal
lever.
• If you press the hazard warning
button, both indicators and all turn
signals blink at the same time.
• Does not blink or blinks rapidly-
A turn signal light bulb has blown.
Change the bulb immediately.
 Î Replacing Light Bulbs P.252, 253
—
High-Beam
Indicator
• Comes on when the high beam
headlights are on.
• Comes on with reduced brightness
when DRL (daytime running lights)
are on.
— —
Lights On
Indicator
• Comes on whenever the light
switch is on, or in AUTO when the
exterior lights are on.
• If you remove the key from the
ignition switch while the light is on, a
chime sounds when the driver's door
is opened.
—
31TL1620.indb 69 2010/09/10 16:12:57