Acura 2011 TSX - Manual (Page 249)

247
Replacing Light Bulbs
Continued
M
ain
te
n
an
ce
When replacing, use the following bulbs.
High beam headlight: 60W (HB3)
Low beam headlight: 55W (H1 for halogen bulb Type)
35W (D2S for high voltage discharge type)
High Beam Headlight
6-cylinder models
1. Remove all the engine compartment
covers.
Engine Compartment Covers Î P.233
Passenger side
All models
2. Remove the engine coolant reservoir.
Headlight Bulbs
NOTICE
Halogen bulbs get very hot when lit.
Oil, perspiration, or a scratch on the glass can cause
the bulb to overheat and shatter.
The headlight aim is set by the factory, and typically
does not need to be adjusted. However, if you
regularly carry heavy items in the trunk or tow a
trailer, have the aiming readjusted at a dealer or by
a qualified technician.
The HB3 and H1 types are halogen bulbs.
When replacing a bulb, handle it by its base, and
protect the glass from contact with your skin or
hard objects. If you touch the glass, clean it with
denatured alcohol and a clean cloth.
Headlight Bulbs
Engine Coolant
Reservoir
Engine Coolant
Reservoir
6-cylinder models
4-cylinder models
31TL1620.indb 247 2010/09/10 16:13:45