Acura 2011 TSX - Manual (Page 179)

177 Continued
Fe
atu
re
s
Bluetooth ® HandsFreeLink ® HFL Menus
System Setup
This command group allows you to change or customize HFL basic settings.
To set a four-digit passcode to lock the HFL system for security
1. Say "System Setup."
2. Say "Security."
3. Follow the HFL prompts and say the four-digit number of your choice.
4. Follow the HFL prompts and confirm the number.
To change the security passcode
1. Say "System Setup."
2. Say "Change Passcode" after the prompts.
3. Say the new four-digit passcode after the HFL prompts.
4. Follow the HFL prompts.
To select a ring tone or a prompt as the incoming call notification
1. Say "System Setup."
2. Say "Call Notification" after the prompts.
3. Say "Ring Tone" or "Prompt" after the prompts. For no audible notification, say
"Off."
System Setup
Press the button before a command.
Once a passcode is set, you are required to enter
the passcode with every new key cycle to use HFL.
If you forget the code, go to your dealer to have the
passcode reset. You can also cancel the
passcode by clearing all the data stored in the HFL
system.
To clear the system Î P. 178
The default setting of the incoming notification is a
ring tone.
31TL1620.indb 177 2010/09/10 16:13:27