beautypg.com

Automatic operation (automatic lighting control) – Acura 2011 TSX User Manual

Page 108

background image

Operating the Switches Around the Steering Wheel Light Switches

106

C

o

nt

ro

ls

Automatic Operation (automatic lighting control)

Automatic lighting control can be used when
the ignition switch is in ON II .

When you turn the light switch to AUTO ,
the headlights and other exterior lights will
switch on and off automatically depending
on the ambient brightness.

Automatic Operation (automatic lighting control)

We recommend that you turn on the lights manually
when driving at night, in a dense fog, or in dark
areas such as long tunnels or parking facilities.

The light sensor is in the location shown below.
Do not cover this light sensor with anything;
otherwise, the automatic lighting system may not
work properly.

Light Sensor

You can change the AUTO light sensitivity and
automatic lighting off timer setting using the multi-
information display.

Customization Procedure

Î

P. 80

Automatic lighting off feature

The headlights, all other exterior lights, and the instrument panel lights turn off
within 15 seconds after you remove the key and close the driver's door.

If you turn the ignition switch to LOCK 0 with the headlight switch on, but do
not open the door, the lights turn off after 10 minutes (3 minutes, if the switch is
in the AUTO position).

The lights turn on again when you unlock or open the driver's door. If you unlock
the door, but do not open it within 15 seconds, the lights go off. If you open the
driver's door, you will hear a lights on reminder chime.

31TL1620.indb 106

2010/09/10 16:13:08

This manual is related to the following products: