Brake/clutch fluid, Checking the brake fluid – Acura 2011 TSX User Manual
Page 246

Maintenance Under the Hood Brake/Clutch Fluid
244
M
ain
te
n
an
ce
Brake/Clutch Fluid
Use the same fluid for both the brakes and clutch.
Specified fluid: Honda Heavy Duty Brake Fluid DOT 3
Checking the Brake Fluid
The fluid level should be between the MIN
and MAX marks on the side of the reservoir.
Brake/Clutch Fluid
NOTICE
Brake fluid marked DOT 5 is not compatible with
your vehicle’s braking system and can cause
extensive damage.
If the specified brake fluid is not available, you
should use only DOT 3 or DOT 4 fluid from a sealed
container as a temporary replacement.
Using any non-Honda brake fluid can cause
corrosion and decrease the longevity of the system.
Have the brake system flushed and refilled with
Honda Heavy Duty Brake Fluid DOT 3 as soon as
possible.
If the brake fluid level is at or below the MIN mark,
have a dealer inspect for leaks or worn brake pads
as soon as possible.
MAX
MAX
MIN
MIN
Brake
Reservoir
Brake
Reservoir
4-cylinder models
6-cylinder models
31TL1620.indb 244
2010/09/10 16:13:44