Acura 2011 TSX - Manual (Page 34)

Seat Belts Seat Belt Inspection
32
Sa
fe D
riv
in
g
Seat Belt Inspection
Regularly check the condition of your seat belts as follows:
Pull each belt out fully, and look for frays, cuts, burns, and wear. •
Check that the latches work smoothly and the belts retract easily. •
If a belt does not retract easily, cleaning the belt may correct the problem.
Only use a mild soap and warm water. Do not use bleach or cleaning
solvents. Make sure the belt is completely dry before allowing it to retract.
Any belt that is not in good condition or working properly will not provide proper
protection and should be replaced as soon as possible.
A belt that has been worn during a crash may not provide the same level of
protection in a subsequent crash. Have your seat belts inspected by a dealer after
any collision.
Seat Belt Inspection
WARNING
Not checking or maintaining seat belts can
result in serious injury or death if the seat
belts do not work properly when needed.
Check your seat belts regularly and have
any problem corrected as soon as possible.
31TL1620.indb 32 2010/09/10 16:12:45