Acura 2011 TSX - Manual (Page 107)

105 Continued
C
o
nt
ro
ls
Operating the Switches Around the Steering Wheel Turn Signals Light Switches
Turn Signals
The turn signals can be used when the
ignition switch is in ON II .
Rotating the light switch turns the lights on
and off, regardless of the position of the
ignition switch.
High beams
Push the lever forward until you hear a click.
Low beams
When in high beams, pull the lever back to
return to low beams.
Flashing the high beams
Pull the lever back, and release it.
Manual Operation
Light Switches
If you remove the key with the lights on, a lights on
reminder chime will sound.
When the lights are on, the lights on indicator in
the instrument panel will be on.
Indicators Î P.64
Repeatedly turning the headlights on and off
reduces the life of the HID headlight bulbs.
If you sense that the level of the headlights is
abnormal, have the vehicle inspected by a dealer.
Do not leave the lights on when the engine is off
because it will cause the battery to discharge.
Light Switches
Right Turn
Left Turn
High Beams
Low Beams
Flashing the
high beams
Turns on side marker, tail and
license plate lights
Turns on headlights, parking,
side marker, tail, and license
plate lights
31TL1620.indb 105 2010/09/10 16:13:07