Activeforever Plextalk PTR2 Digital DAISY Player and Recorder - Manual (Page 215)

216
Possible cause 2: Writing failed while in progress.
Solution: Use the "Search for edited information in the disc" feature to try
to recover recording data. For further detail refer to Section 17.8.2.
Possible cause 3: The CD is blank.
Solution: Make your recording and then play it back or eject the CD and
use a different CD.
Symptom: CDs or cards cannot be recorded on.
Possible cause: Fault with the input.
Solution: Check the input source and then correct the input setting.
Symptom: The recording level cannot be adjusted.
Possible cause: You are recording using the built in microphone.
Solution: Change the input source by connecting to the External
Microphone or the Line In socket.
Symptom: PLEXTALK is not recognized as a CD-R or CD-RW drive on the
PC.
Possible cause: The operating system is Windows 98SE, and the driver is
not installed.
Solution: Install the driver. Refer to Section 21.4.2 for detailed instructions
on how to do this.
Symptom: The same CD location is repeatedly played.
Possible cause: A repeat play mode has been selected.
Solution: Switch to "Standard play" mode in the "Playing settings" menu.
In Book Creator mode you can also do this by pressing the Number 3 Key.
Symptom: There is no voice guidance.
Possible cause 1: The guide volume has been set to '0'.
Solution: Increase the guide volume so that the guide speech can be
heard.
Possible cause 2: The "Switch over the guidance while recording" is set to
"Guidance off".
Solution: Change the setting to "Guidance on".
Response to spoken error messages.
Errors during DAISY playback.
Voice Guide: "Improper or damaged disc."
Possible cause 1: An unsupported CD has been inserted.