Activeforever Plextalk PTR2 Digital DAISY Player and Recorder - Manual (Page 170)

171
• If you press the Enter key, PLEXTALK will ask you to confirm that
you wish to continue with the erasing process. Press the Enter key
again to continue or the Cancel key to abort.
• If you choose to continue, the erasing process will start. When the
process is complete, PLEXTALK will say "Finished".
CAUTION: It is strongly recommended that, when erasing a CD-RW disc,
you should ensure that PLEXTALK is connected to a mains source. Failure
to do so may result in the process not completing properly.
CAUTION: If you use PC software such as Eased Creator or Nero to erase
CD-RW discs, ensure that you use the Full Erase setting. If you use
PLEXTALK to record onto a "Quick Erased" CD-RW disc, the disc will not be
playable on other devices.
NOTE: When the CD-RW is erased, PLEXTALK will behave as if you have
inserted a blank CD-RW disc.
NOTE: The information in this section applies only to CD-RW type discs.
CD-R discs cannot be erased .
20.4. Erasing a CF card.
PLEXTALK allows you to erase a CF card as many times as you want. To
erase a CF card, do the following:
• Press the Menu key once to access the Main Menu.
• Use the Number 4 or 6 key to go to the "Media Management"
option and select it by pressing the Enter key.
• Use the Number 4 or 6 key to go to the "Erase card" option and
select it by pressing the Enter key.
• PLEXTALK will ask you to confirm that you wish to continue with
the erasing process. Press the Enter key again to continue or the
Cancel key to abort.
• If you choose to continue, the erasing process will start. When the
process is complete, PLEXTALK will say "Finished".
NOTE: When the CF card is erased, PLEXTALK will behave as if you have
inserted a blank CF card.