Activeforever Plextalk PTR2 Digital DAISY Player and Recorder - Manual (Page 131)

132
17.7.3. Setting a page.
To set a page marker after completing the recording, do the following:
• Navigate through your recording to the approximate location
where you wish to set the page marker.
• During playback or when the playback is stopped, press the Page
key twice. PLEXTALK will say "Set page XX. Are you sure" (where
"XX" is the number of the page you are about to set).
• You will then hear 3 seconds of audio played repeatedly from the
location you are in the recording.
• PLEXTALK will then ask you to adjust the position by using your
Number 4 or 6 key.
• Use these keys to move the page marker position backwards or
forwards by 0.1 second increments.
• When you are happy that the page is positioned where you want it,
press the Enter key to finish the process.
• PLEXTALK will confirm that the page has been set by saying "Set
page XX" (where "XX" is the number of the page that has just been
set).
NOTE: Page markers will be renumbered automatically from the
beginning.
NOTE: The page marker will be set at the start of the 3 second audio clip.
17.7.4. Cancelling a page setting.
If you have set a page marker in the wrong place, you can easily cancel it.
To cancel a page marker after completing the recording, do the following:
• Navigate to the location of the page marker you wish to cancel.
• During playback or when the playback is stopped, press the Page
key three times. PLEXTALK will say "Cancel page XX. Are you sure"
(where "XX" is the number of the page you are about to cancel).
• You will then hear the first 3 seconds of audio, from the current
page, played repeatedly.
• If you wish to cancel this page, press the Enter key.