Activeforever Plextalk PTR2 Digital DAISY Player and Recorder - Manual (Page 100)

101
15.4.2. Cancelling the sleep timer.
To cancel the sleep timer, do the following:
• Press the Information key once. PLEXTALK will tell you that the
sleep timer is currently on and the number of minutes remaining
before shut down. It will then tell you to enter a number or to
press 0 if you wish to cancel the setting.
• Enter the number 0, using the Number Pad.
• Press the Enter key to confirm and PLEXTALK will say "Cancelled".
15.5. Power On timer function.
PLEXTALK gives you the ability to set 2 times when the unit will
automatically turn itself on. These are called "Power on timer 1" and
"Power on timer 2". These work similar to the way an alarm clock radio
works. You can set the timers to come on at the same time each day.
This section shows you how to activate, deactivate and modify the power
on timer settings.
15.5.1. Check the time on the internal clock.
Before setting the power on timer function, you should double check that
the date and time on your PLEXTALK's internal clock is correctly set. Press
and hold down the Information key to hear the current date and time
spoken. If the date or time is not correct, you should refer to Section 10.1 -
Setting the date and time for instructions on how to reset the date and
time.
15.5.2. Activating the power on timer.
To activate or turn on one of the power on timers, do the following:
• Press the Menu key once to access the Main Menu.