Activeforever Plextalk PTR2 Digital DAISY Player and Recorder - Manual (Page 194)

195
• Use the Number 4 or 6 key to go to the "Control panel" option and
select it by pressing the Enter key.
• Use the Number 4 or 6 key to go to the "Clear all settings" option
and select it by pressing the Enter key.
• PLEXTALK will ask you to confirm that you wish to proceed. Press
the Enter key to clear all settings or the Cancel key to abort.
• After a short while, all settings will be cleared and PLEXTALK will
say "Finished".
CAUTION: If you use the “Clear all settings” function when the “Switch
USB destination” option is set to “Card drive”, PLEXTALK will reboot
automatically.
23.3. Managing PTR2 memory.
PLEXTALK has internal memory that is used for voice bookmarks and voice
notes in the notepad. A total of 30 minutes of recording is available. The
default factory setting allocates 20 minutes for the notepad and 10
minutes for voice bookmarks. You can reallocate this internal memory to
suit your particular needs. For instance, if you use the notepad a lot, you
may want to allocate more memory to it and reduce the amount of
memory available for voice bookmarks.
NOTE: The memory setting is given in terms of minutes of use.
To reallocate the available 30 minutes of memory, do the following:
• Press the Menu key once to access the Main Menu.
• Use the Number 4 or 6 key to go to the "Control panel" option and
select it by pressing the Enter key.
• Use the Number 4 or 6 key to go to the "Allocation of the memory"
option and select it by pressing the Enter key.
• PLEXTALK will speak the current settings for voice bookmarks and
for the notepad.
• Use the Number 4 or 6 key to move through the available 7 options
and select the setting you want by pressing the Enter key.
• PLEXTALK will confirm that the new memory allocation setting has
been set.