ACR&Artex C406-2 HM - Manual (Page 82)

ACR ELECTRONICS, INC / ARTEX PRODUCTS
DESCRIPTION, OPERATION, INSTALLATION AND MAINTENANCE MANUAL
C406-2 (453-5000), C406-2HM (453-5001)
25-62-11
Page 82 of 87
JUN 20/13
SUBTASK 25-62-11-990-003
C. Nomenclature Column
(1) This column contains descriptive nomenclature for each part, service bulletin numbers
affecting the part, and obsolete part numbers.
(2) The indenture system used in the “Nomenclature” column indicates the relationship of one
part to another, as follows:
(3) Assemblies, subassemblies, and detail parts subject to modification, deletion, addition, or
replacement by an issued service bulletin, are annotated to indicate both pre- and post-
service bulletin configurations. The term (PRE SB XXXX) in the “Nomenclature” column
designates the original configuration, and the term (POST SB XXXX) identifies assemblies and
parts after the modification has been completed.
1 2 3
End Item or Major Assembly
ATTACHING PARTS
Attaching Parts for End Item or Major Assembly
***
. Detail Parts for End Item or Major Assembly
. Subassemblies
ATTACHING PARTS
. Attaching Parts for Subassemblies
***
. . Detail Parts for Subassemblies
ATTACHING PARTS
. . Attaching Parts for Detail Parts
***