ACR&Artex C406-2 HM - Manual (Page 16)

ACR ELECTRONICS, INC / ARTEX PRODUCTS
DESCRIPTION, OPERATION, INSTALLATION AND MAINTENANCE MANUAL
C406-2 (453-5000), C406-2HM (453-5001)
25-62-11
Page 16 of 87
JUN 20/13
SUBTASK 25-62-11-990-002
B. Application
(1) This manual constitutes supporting data/documentation for the C406-2 Series ELT, including:
(a) Description and Operation
(b) Test and Fault Isolation (includes inspection criteria)
(c) Removal
(d) Installation
(e) Registration
(f) Illustrated Parts List
(2) In the United States, the C406-2 Series ELT must be installed and maintained in accordance
with the requirements herein and 14 CFR, FAR Parts 43, and 91; and other airworthiness
requirements, as applicable.
(3) In Canada, the C406-2 Series ELT must be installed and maintained in accordance with the
requirements herein and Canadian Aviation Regulations (CAR), Part V, Paragraph 551.104 and
other CAR airworthiness requirements, as applicable.
(4) C406-2 Series ELT installation and maintenance in all other countries must comply with the
requirements herein and applicable national airworthiness requirements.
(5) The accessories (i.e., remote switch and antennas) addressed in this manual are the
accessories most commonly associated with the C406-2 Series ELT. Other options, such as a
different remote switch configuration or an ELT/NAV Interface, should be installed and
maintained in accordance with the written instructions specific to the accessory.
NOTE: Contact ACR Electronics for optional accessories approved for use with a C406-2
Series ELT.
(6) To ensure proper operation, only parts listed in the Illustrated Parts List of this manual or
those recommended by ACR Electronics may be used as replacement parts for the C406-2
Series ELT.
TASK 25-62-11-990-802
2. Model Descriptions
SUBTASK 25-62-11-990-001
A. C406-2
(1) The C406-2 is a type AF (Automatic Fixed) ELT, which transmits on 121.5, 243.0, and 406
MHz.
(2) The ELT is enclosed within a multi-piece mounting frame consisting of a mounting tray,
protective top cover and mounting frame cap.
(3) When ordered as a system, an installation kit, cockpit remote switch, coax cables, audible
buzzer, and dual input antenna are provided.