ACR&Artex C406-2 HM - Manual (Page 59)

25-62-11
Page 59 of 87
JUN 20/13
ACR ELECTRONICS, INC / ARTEX PRODUCTS
DESCRIPTION, OPERATION, INSTALLATION AND MAINTENANCE MANUAL
C406-2 (453-5000), C406-2HM (453-5001)
Figure 16 Blade Antennas 110-333 and 110-337 Outlines and Dimensions
3.74 EST
(95)
3.8 MAX
(97)
10.1 MAX
(257)
4.90
(125)
2.381
(60.5)
0.900 (22.9)
1.189 (30.2)
1.380 (35.1)
1.060 (27.0)
2.05 MAX (52)
0.200 - 0.207 (5.1 - 5.3) Ø (6 PLCS)
SPOT FACED Ø 0.5 (13)
Dimensions in inches (mm)
110-333
3.07 EST
(80)
INSTALLATION NOTES:
1. MOUNT ANTENNA USING #10-32 SS MACHINE
SCREWS AND ASSOCIATED HARDWARE
72548(72“/%,1“1‡FP
2. PROVIDE 0.625 (5/8”) (16 MM) Ø HOLE FOR
BNC CONNECTOR AND 0.703 (45/64”) (17.9 MM)
‡HOLE FOR TNC CONNECTOR.
3. PROVIDE 0.213 (5.4 MM) Ø HOLES (6 PLCS)
FOR ATTACHING SCREWS.
4. APPLY A LAYER OF ANTI-CORROSION BONDING
GREASE BETWEEN AICRAFT AND ANTENNA
BASE.
5. GASKET IS NOT SUPPLIED AND USE IS
OPTIONAL. CONTACT ARTEX AND REQUEST
P/N 183-1622 IF ONE IS DESIRED.
RF CONNECTOR TNC FEMALE
RF CONNECTOR BNC FEMALE
0.500 (12.7)
0.500 (12.7)
C.G.
7.75
(197)
30º
15º
2.70
(69)
2.89
(73)
2.25
(57)
0.562 (14.3)
8.25
(210)
6.000
(152.4)
3.000
(76.2)
1.620 (41.2)
1.500
(38.1)
0.750 (19.1)
1.25 (32)
0.625 (15.9)
0.201 (5.1) Ø (6 PLCS)
RF CONNECTOR BNC FEMALE
Dimensions in inches (mm)
C.G.
110-337
INSTALLATION NOTES:
1. MOUNT ANTENNA USING #10-32 SS MACHINE
SCREWS AND ASSOCIATED HARDWARE.
72548(72“/%,1“1‡FP
2. PROVIDE 0.625 (5/8”) (16 MM) Ø HOLE FOR
BNC CONNECTOR AND 0.703 (45/64”) (17.9 MM)
‡HOLE FOR TNC CONNECTOR.
3. PROVIDE 0.213 (5.4 MM) Ø HOLES (6 PLCS)
FOR ATTACHING SCREWS.
4. BONDING THROUGH MOUNTING SCREWS
NOT REQUIRED.
5. APPLY A LAYER OF ANTI-CORROSION BONDING
GREASE BETWEEN AICRAFT AND ANTENNA BASE.
6. GASKET NOT SUPPLIED AND USE OPTIONAL.
REQUEST P/N 280-0340 IF ONE IS DESIRED.
1.160 (29.5)
5.580
(141.7)
RF CONNECTOR
TNC FEMALE