ACR&Artex C406-2 HM - Manual (Page 58)

ACR ELECTRONICS, INC / ARTEX PRODUCTS
DESCRIPTION, OPERATION, INSTALLATION AND MAINTENANCE MANUAL
C406-2 (453-5000), C406-2HM (453-5001)
25-62-11
Page 58 of 87
JUN 20/13
MHz cable has BNC connectors and the 406 MHz cable has TNC (antenna) and TPS (ELT)
connectors.
Figure 15 Rod Antenna 110-320 and Blade Antenna 110-328-01 Outlines and Dimensions
13.00
(330)
3.5
(89)
3.3
(84)
RF CONNECTOR
TNC FEMALE
15.50 MAX
(394)
2.70 MAX
(69)
1.625 (41.3)
0.812 (20.6)
0.750 (19.1)
0.90 (23)
1.750 (44.5)
4.40 MAX
(112)
RF CONNECTOR
BNC FEMALE
4 - 100° CSK HOLES
Ø 0.170 (4.3)
110-320
Dimensions in inches (mm)
C.G.
INSTALLATION NOTES:
1. MOUNT ANTENNA USING #8-32 SS 100° C’SK
MACHINE SCREWS AND ASSOCIATED
HARDWARE.
TORQUE TO 20 ±1 LB-IN (226 ±11 N•cm)
2. PROVIDE 0.625 (5/8”) (16 MM) Ø HOLE
BNC CONNECTOR AND 0.703 (45/64”)
(17.9 MM) Ø HOLE FOR TNC CONNECTOR.
3. PROVIDE 0.182 (4.6 MM) Ø HOLES (4 PLCS)
FOR ATTACHING SCREWS.
4. APPLY A LAYER OF ANTI-CORROSION BONDING
GREASE BETWEEN AICRAFT AND ANTENNA BASE.
5. GASKET NOT SUPPLIED AND USE OPTIONAL.
REQUEST P/N 280-0320 IF ONE IS DESIRED.
GASKET (OPTIONAL)
1.300 (33.0)
9.00 MAX
(229)
6.50
(165)
5.10
(130)
2.70
(69)
5.47
(139)
RF CONNECTOR
BNC FEMALE
RF CONNECTOR
TNC FEMALE
RUBBER AND CORK GASKET
0.062 (2) THICK
8.40 (213)
6.000 (152.4)
5.58 (142)
1.620 (41.1)
3.000 (76.2)
1.10 (28)
1.500 (38.1)
1.250 (31.8)
0.625 (15.9)
110-328-01
Dimensions in inches (mm)
1.125 (28.6)
0.5625 (14.3)
INSTALLATION NOTES:
1. MOUNT ANTENNA USING #10-32 SS 100º C’SK
MACHINE SCREWS AND ASSOCIATED
HARDWARE.
2. PROVIDE 0.625 (5/8”) (16 MM) Ø HOLE FOR
BNC CONNECTOR AND 0.703 (45/64”) (17.9 MM)
∅ HOLE FOR TNC CONNECTOR.
3. PROVIDE 0.213 (5.4 MM) Ø HOLES (6 PLCS)
FOR ATTACHING SCREWS.
4. IF GASKET IS REMOVED, APPLY A LAYER OF ANTI-
CORROSION GREASE BETWEEN AICRAFT
AND ANTENNA BASE.