B. c406-2hm, Figure 1 elt orthogonal axes, Approvals – ACR&Artex C406-2 HM User Manual
Page 17: A. c406-2 and c406-2hm
25-62-11
Page 17 of 87
JUN 20/13
ACR ELECTRONICS, INC / ARTEX PRODUCTS
DESCRIPTION, OPERATION, INSTALLATION AND MAINTENANCE MANUAL
C406-2 (453-5000), C406-2HM (453-5001)
SUBTASK 25-62-11-990-002
B. C406-2HM
(1)
The C406-2HM ELT was developed for helicopter installations and features an additional 5-
axis G-Switch module, which allows the ELT to be activated in any of six axes. See Figure 1.
(2)
The C406-2HM ELT is identical to the C406-2 ELT in all other aspects.
Figure 1 ELT Orthogonal Axes
TASK 25-62-11-990-803
3. Approvals
SUBTASK 25-62-11-990-001
A. C406-2 and C406-2HM
(1)
FAA TSO C126, Type AF
(a)
The conditions and tests required for TSO approval of this article are minimum
performance standards. It is the responsibility of those installing this article either on or
within a specific type or class of aircraft to determine that the aircraft installation
conditions are within TSO standards. TSO articles must have separate approval for
installation in an aircraft. The article may be installed only if performed under 14 CFR
Part 43 or the applicable airworthiness requirements.
(2)
Transport Canada - Type Certificate Data Sheet AP-47 Issue 2
(3)
Industry Canada - Certification Number 1215873110AF
(4)
JTSO-2C126
(5)
COSPAS-SARSAT - Certificate No. 112 or 170
+Y
-Y
-X
+X
+Z
-Z
FWD