ACR&Artex C406-2 HM - Manual (Page 60)

ACR ELECTRONICS, INC / ARTEX PRODUCTS
DESCRIPTION, OPERATION, INSTALLATION AND MAINTENANCE MANUAL
C406-2 (453-5000), C406-2HM (453-5001)
25-62-11
Page 60 of 87
JUN 20/13
THIS IS A BLANK PAGE
Figure 17 Blade Antenna 110-337-11 Outline and Dimensions
2.25
(57)
0.562 (14.3)
8.25
(210)
6.000
(152.4)
3.000
(76.2)
1.620 (41.2)
1.500
(38.1)
0.750 (19.1)
1.25 (32)
0.625 (15.9)
0.201 (5.1) Ø (6 PLCS)
Dimensions in inches (mm)
110-337-11
1.160 (29.5)
5.580
(141.7)
RF CONNECTOR BNC FEMALE
RF CONNECTOR
TNC FEMALE
7.85
(199)
30º
15º
INSTALLATION NOTES:
1. MOUNT ANTENNA USING #10-32 SS MACHINE SCREWS AND
ASSOCIATED HARDWARE AND TORQUE TO 20 IN/LBS.
2. PROVIDE A 5/8" (.625") DIAMETER HOLE FOR THE BNC CONNECTOR.
3. PROVIDE A 5/8" (.625") DIAMETER HOLE FOR THE TNC CONNECTOR.
4. A LAYER OF ANTI-CORROSION BOUNDING GREASE SHOULD BE
APPLIED BETWEEN THE AIRCRAFT AND THE BASE OF THE ANTENNA
5. THIS ANTENNA IS BOUNDED THRU THE MOUNTING SCREWS.
6. GASKET IS NOT SUPPLIED AND USE IS OPTIONAL.
CONTACT ACR/ARTEX AND REQUEST PART #280-0340 IF ONE IS DESIRED.