Rmc 5018 – Acnodes RMC 5018 User Manual
Page 73
RMC 5018
1U Rackmount System
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
14628 Central Blvd,
Chino, CA91710
tel:909.597.7588, fax:909.597.1939
PS/2 KB/MS WakeUp
This feature is used to awaken from Standby mode by a PS/2 mouse or PS/2 keyboard. The options
are Enabled and Disabled.
ACPI Aware O/S
Enable ACPI support if it is supported by the OS to control ACPI through the Operat- ing System.
Otherwise, disable this feature. The options are Yes and No.
Suspend Mode
This setting allows you to configure the ACPI (Advanced Configuration and Power Interface) state for
your system when it is in the Suspend mode. The options are S1, S3 and Auto.
AMI OEMB Table
Set this value to allow the ACPI BIOS to add a pointer to an OEMB table in the Root
System Description Table (RSDT) table. The options are Enabled, and Disabled.
ACPI APIC Support
Select Enabled to include the ACPI APIC Table Pointer in the RSDT (Root System
Description Table) pointer list. The options are Enabled and Disabled.
APIC ACPI SCI IRQ
W hen this item is set to Enabled, APIC ACPI SCI IRQ is supported by the system. The options are
Enabled and Disabled.
Headless Mode
This feature is used to enable the system to function without a keyboard, monitor or mouse attached
The options are Enabled and Disabled.
ACPI Version Features
The options are ACPI v1.0, ACPI v2.0 and ACPI v3.0. Please refer to ACPI's website for further expla-
nation: