Rmc 5018, 2 main setup – Acnodes RMC 5018 User Manual

Page 58

RMC 5018

1U Rackmount System

All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.

14628 Central Blvd,

Chino, CA91710

tel:909.597.7588, fax:909.597.1939

Starting the Setup Utility

Normally, the only visible POST (Power On Self Test) routine is the memory test. As the memory is
being tested, press the key to enter the main menu of the AMI BIOS Setup Utility. From
the main menu, you can access the other setup screens. An AMI BIOS identification string is dis-
played at the left bottom corner of the screen, below the copyright message.

Warning!! Do not upgrade the BIOS unless your system has a BIOS-related issue. Flashing
the wrong BIOS can cause irreparable damage to the system. In no event shall
Supermicro be liable for direct, indirect, special, incidental, or consequential damages aris
ing from a BIOS update. If you have to update the BIOS, do not shut down or reset the system
while the BIOS is updating. This is to avoid possible boot failure.

7-2 Main Setup

When you first enter the AMI BIOS Setup Utility, you will enter the Main setup screen. You can always
return to the Main setup screen by selecting the Main tab on the top of the screen. The Main BIOS
Setup screen is shown below.