Accusys ExaSAN B08S2-PS - Manual (Page 20)

1. Introduction
User Guide Page 1-10
failed.
No Light indicates the LED failed or
power off
4 Heartbeat LED Blue
Indicates the controller status
• Flashing Blue indicates the
controller is active
• No light indicates the controller is
inactive.
1.4.1.2 Beeper Codes
Controller Status Beeper mode
Turn on the Controller Two short beeps
System Panic Long beep
Controller Work Status, ex:
Disk init, disk rebuild, disk
expansion, disk migratrion, disk
snapshot, etc. Regularly repeating one short beep
System Problem, ex:
Fan issue, Power issue, RAID error,
etc. Regularly repeating one long beep and
two short beeps
Create array successfully One short beep
Memory test error Regularly repeating three rapid short
beeps
1.4.1.3 Disk Mapping
Disk 1 Disk 5
Disk 2 Disk 6
Disk 3 Disk 7
Disk 4 Disk 8