HP iPAQ Glisten - Manual (Page 136)

Install synchronization software on your PC
● If your computer is running Windows XP, you need to download ActiveSync at:
http://www.windowsmobile.com/getstarted .
● If your computer is running Windows Vista, download Windows Mobile Device Center (WMDC)
at: http://www.windowsmobile.com/getstarted .
NOTE: Microsoft ActiveSync or Windows Mobile Device Center must be installed on your computer
before you connect your iPAQ to the computer.
Connect your iPAQ to your PC
After installing ActiveSync or Windows Mobile Device Center, connect your iPAQ to your computer.
NOTE: If you are syncing your Microsoft Outlook email, you will be prompted for an Exchange
Server address, user name, password, and domain. The Exchange Server Address will most likely be
the same as your Outlook Web Access server address.
If you are using Windows Mobile Device Center, follow these steps:
1. Connect your iPAQ to the computer using the USB sync cable. Windows Mobile Device Center
will launch automatically.
2. On your computer, click Set up your device.
3. On the What kind of items to you want to sync? page, select the items you want to
synchronize, and then click Next.
NOTE: If you are syncing your Microsoft Outlook email, on the Type the email server
information page, you will be prompted for an Exchange Server address, user name,
password, and domain.
4. On the Ready to set up the Windows Mobile partnership page, click Next.
NOTE: In the Device name box, you can enter a different display name for your iPAQ.
5. Click Next, and then click Finish to complete the setup.
NOTE: After the setup is completed, synchronization takes place every time your iPAQ is connected
to your computer.
If you are using ActiveSync, follow these steps:
1. Connect your iPAQ to the computer using the USB sync cable. ActiveSync will launch automatically.
2. On your computer, on the Welcome to the Pocket PC Sync Setup Wizard page, click
Next.
124 Chapter 23 Synchronize your iPAQ