HP iPAQ Glisten - Manual (Page 131)

4. Tap New Incoming Port or New Outgoing Port.
NOTE: New Outgoing Port is available only if at least one Bluetooth device supports serial
(COM) connection.
5. Select the device and tap Next.
6. Select a numbered COM port from the list.
NOTE: If the port cannot be created, it is already in use. Select a different numbered port.
7. To limit communication on this COM port to only devices with which the iPAQ has a Bluetooth
partnership, select the Secure Connection check box.
8. Tap Finish.
Turn off Bluetooth
When you are done using Bluetooth, turn it off to free your iPAQ resources and conserve battery power.
1. Press Start , tap Settings > Connections > Wireless Manager, and then tap Menu >
Bluetooth Settings.
2. Tap the Mode tab, clear the Turn on Bluetooth check box, and then tap OK.
Turn off Bluetooth 119