3Com 3C840 - Manual (Page 119)

11
M
ONITORING THE
O
FFICE
C
ONNECT
R
EMOTE
840
Introduction This chapter describes the details for performing the system monitoring
on the OfficeConnect Remote 840.
■ “Overview”
■
“Throughput Performance”
■ “Ethernet Interface”
■ “Interface Status”
■ “Remote Site Connection”
■
“IP”
■ “DHCP”
■ “Address Translation”
■
“IPX”
■ “Bridge”
■ “The following screen capture shows a successful connection to a
remote site named red using PPP network service. Critical Events Log”
Overview The OfficeConnect Remote 840 Manager provides a wide range of
monitor screens, including real-time throughput graphs, routing tables,
and interface and protocol counters. The screens help to troubleshoot
connection problems and are grouped by topic below.
Throughput
Performance Real-time throughput graphs display both the transmit and receive ATM
throughput for up to four remote site connections. To access this screen,
go to the OfficeConnect Remote 840 Manager home page and select
Monitor > ATM Throughput.
840ug.book Page 1 Friday, July 7, 2000 2:23 PM