Xerox 701P35371 User Manual
Page 73
8.13
U s e r G u i d e
E R R O R C O D E S
8
Error Codes
These error codes may appear in the display:
Symptom
Where Error Occurs
Diagnosis and/or Solution
*1
Scanner unit
Initial motor hardware error. "Shipping Lock is on,
unlock to operate" appears in display.
•
Turn power off. Pull the two release buttons on
the sides of the machine toward you and lift the
Access Cover.
•
To prevent damage the WorkCentre scanner
chassis is shipped in the locked position. Pull the
lock towards you to unlock the chassis.
L100
Scanner unit
Motor hardware error. Follow instructions for *1.
0001
Operation panel unit
Unidentified operation panel. Follow instructions for
*1.
0016
Scanner unit
Motor hardware error 2 (Set Document Feeder, M960
only). Follow instructions for *1.
0032
Printer unit
Carriage position error. Unplug and plug in. If this
fails, call service.
E701
Copy unit
Image processing hardware error. Unplug and plug in.
If this fails, call service.
E713
Scanner unit
CCD hardware unit. Unplug and plug in. If this fails,
call service.
E731
Copy unit
Flash memory error. Unplug and plug in. If this fails,
call service.
F502
Scanner unit
Lamp hardware error. Unplug and plug in. If this fails,
call service.
F900
RDY-Bus communication
RDY-Bus communication error. Unplug and plug in. If
this fails, call service.
00-ugm940.book Page 13 Monday, July 31, 2000 3:20 PM