Xerox 701P35371 - Manual (Page 34)

3.10
U s e r G u i d e
P R I N T I N G B A N N E R S
Printing Banners
For printing banners, we recommend you use 20
lb. or 75 gsm paper. You can feed up to five sheets
of banner paper through the bypass tray.
After you open your document and select File:
Print, click on the Properties button, then the
Paper/Output tab, then select Banner in the
Paper size list box. In the paper source list box
select Bypass Tray.
Tear off the number of sheets you will need to
print your banner (5 maximum).
Tear off the perforated edges and fan the stack to
separate the edges.
Open the bypass tray, which is located on the back
of the machine, to the flat position.
Place the unattached edge into the bypass tray slot
on the back of the machine. Push the paper down
until resistance is met. If inserted correctly, the
banner feeds into the machine, then pauses until
you click OK.
Sheets will continue to feed until printing is
complete.
1
2
3
4
5
6
00-ugm940.book Page 10 Monday, July 31, 2000 3:20 PM