Xerox 701P35371 - Manual (Page 65)

U s e r G u i d e
8.5
Q U A L I T Y P R O B L E M S
Quality Problems
Symptom DiagnosDia Diagnosis and/or Solution gnosis and ors and/
Light or blurred characters • You may be using Draft quality. Try selecting a better print
mode using the Quality button (Normal, eXpress, Best).
• Make sure you are using good quality ink jet paper. Try another
type of paper. Glossy paper provides better quality.
• If you are printing on photo, transparency, or iron-on paper, you
may be printing on the wrong side of the paper.
• The print head may need cleaning. If the test print is blank, try
cleaning the print head:
• Press Menu/Exit on the Control Panel.
• Press the down Navigator button until Maintenance
displays.
• Press the right Navigator button until Clean Print Head
1 displays. Press the Select button.
• If not printing on envelopes or card stock, ensure the paper
thickness knob on the side of the machine is in the paper
position.
00-ugm940.book Page 5 Monday, July 31, 2000 3:20 PM