Table 100 standards supported – ZyXEL Communications ES-2024 Series User Manual
Page 239

Appendix A Product Specifications
ES-2024 Series User’s Guide
239
The following list, which is not exhaustive, illustrates the standards supported in the Switch.
Clustering
Act as clustering slave or master
24 slaves can be managed in a cluster at most
System management
Configuration by console/Telnet/web
Firmware upgrade by FTP/web/console
Configuration backup and restore by FTP/web/console
System management access control
System clock by manual setup or NTP
SNMP v2c / v3
Telnet (up to 9 concurrent sessions)
RMON group 1,2,3,9
ICMP echo/echo reply
Cisco-like CLI commands
Text based configuration file
Administration user management
Syslog
Daylight saving time support
802.3ah OAM
Loop guard
Table 100 Standards Supported
STANDARD
DESCRIPTION
RFC 826
Address Resolution Protocol (ARP)
RFC 867
Daytime Protocol
RFC 868
Time Protocol
RFC 894
Ethernet II Encapsulation
RFC 1112
Internet Group Management Protocol v1
RFC 1155
SMI
RFC 1157
SNMPv1: Simple Network Management Protocol version 1
RFC 1213
SNMP MIB II
RFC 1305
Network Time Protocol (NTP version 3)
RFC 1441
SNMPv2 Simple Network Management Protocol version 2
RFC 1493
Bridge MIBs
RFC 1643
Ethernet MIBs
RFC 1757
RMON
RFC 1901
SNMPv2c Simple Network Management Protocol version 2c
RFC 2131, RFC 2132
Dynamic Host Configuration Protocol (DHCP)
RFC 2138
RADIUS (Remote Authentication Dial In User Service)
RFC 2139
RADIUS Accounting
RFC 2236
Internet Group Management Protocol, Version 2.
RFC 2475
DSCP to IEEE 802.1p priority mapping
RFC 2674
SNMP v2, v2c
P-BRIDGE-MIB, Q-BRIDGE-MIB
Table 99 Firmware Specifications (continued)
FEATURE
SPECIFICATION