4 link aggregation setting – ZyXEL Communications ES-2024 Series User Manual
Page 117
Chapter 15 Link Aggregation
ES-2024 Series User’s Guide
117
15.4 Link Aggregation Setting
Click Advanced Application > Link Aggregation > Link Aggregation Setting to display
the screen shown next. See
for more information on link
aggregation.
Figure 53 Advanced Application > Link Aggregation > Link Aggregation Setting
The following table describes the labels in this screen.
Aggregator ID
Link Aggregator ID consists of the following: system priority, MAC address, key, port
priority and port number. Refer to
for more information on
this field.
Status
This field displays how these ports were added to the trunk group. It displays:
•
Static - if the ports are configured as static members of a trunk group.
•
LACP - if the ports are configured to join a trunk group via LACP.
Table 32 Advanced Application > Link Aggregation Status (continued)
LABEL
DESCRIPTION
Table 33 Advanced Application > Link Aggregation > Link Aggregation Setting
LABEL
DESCRIPTION
Link
Aggregation
Setting
This is the only screen you need to configure to enable static link aggregation.
Group ID
The field identifies the link aggregation group, that is, one logical link containing
multiple ports.
Active
Select this option to activate a trunk group.