Parallel, Ethernet – Xerox 701P42722_EN User Manual
Page 96
11 CentreWare Internet Services
96
Xerox CopyCentre/WorkCentre 118 System Administration Guide
1.
At the CentreWare Internet Services home page for the machine, select the
[Properties] tab.
2.
In the [Properties] frame, select the plus symbol [+] to the left of the [Port Settings]
folder.
3.
Select [Ethernet].
4.
Set up the following options to be displayed in the frame.
•
Ethernet Settings
NOTE: For more information about the options, refer to Properties in the CentreWare
Internet Services chapter of the User Guide.
5.
Select [Apply New Settings] to reflect the new setting.
6.
Enter the user ID and password, then select [OK].
NOTE: The default user ID is "admin" and the default password is "x-admin".
7.
When the reboot message appears, select [Reboot].
Parallel
This page allows you to configure the parallel port settings for the following options.
1.
At the CentreWare Internet Services home page for the machine, select the
[Properties] tab.
2.
In the [Properties] frame, select the plus symbol [+] to the left of the [Port Settings]
folder.
3.
Select [Parallel].
4.
Set up the following options to be displayed in the frame.
•
Bi-directional Communication
•
Auto Eject Time
•
Adobe Communication Protocol (Only available when the optional PostScript Kit is
installed.)
NOTE: For more information about the options, refer to Properties in the CentreWare
Internet Services chapter of the User Guide.
5.
Select [Apply New Settings] to reflect the new setting.
6.
Enter the user ID and password, then select [OK].
NOTE: The default user ID is "admin" and the default password is "x-admin".
USB
This page allows you to configure the USB settings for the following options.
1.
At the CentreWare Internet Services home page for the machine, select the
[Properties] tab.