Changing the settings – Xerox 701P42722_EN User Manual
Page 27
System Settings
Xerox CopyCentre/WorkCentre 118 System Administration Guide
27
•
Fax Settings
•
E-mail Settings
NOTE: CentreWare Internet Services is software that enables you to display,
configure and change the settings of the machine by using a browser on a computer
instead of the machine’s control panel. For more information, refer to the CentreWare
Internet Service chapter of the User Guide.
Changing the Settings
Password input is required to change the settings. The machine is delivered with the
factory default password “11111”. It allows you to access the System Settings
described in this chapter.
NOTE: You are advised to change the default password to a more secure one. For
further assistance, refer to Change Password in the Setups Chapter of the User Guide
or contact your Xerox Welcome Center.
Follow these steps to change the default settings:
1.
Press the
control panel.
2.
Select [System Settings] using the
3.
Enter the Key Operator password using
the numeric keypad on the control
panel.
4.
Select [Confirm] using
5.
Select [Common Settings] on the
[System Settings] screen using the
6.
Press the
7.
Select the required option and
customize to meet your needs.
8.
Press the
NOTE: The appearance of the screen on your machine may differ slightly depending
on the model and configuration. However, feature descriptions and functionality
described here remain the same.