Xerox 701P42722_EN - Manual (Page 69)

Changing the Settings
Xerox CopyCentre/WorkCentre 118 System Administration Guide 69
8. Switch off the machine. After the display on the screen clears, switch on the
machine again.
NOTE: The changes you have made will be enabled either after switching off and on,
or after saving [config.txt] with its Reboot option set to [Yes].
Setting Format of config.txt
Item Remarks Value Default
Printer Language Language to be used English English
Host Name Host name of the machine Maximum
15bytes FX-xxxxxx
(xxxxxx: last 6
characters of the
MAC address of
the machine)
Workgroup Name of printer workgroup Maximum
15bytes WORKGROUP
NetBEUI Activation of NetBEUI protocol On/Off On
TCP/IP Activation of TCP/IP protocol On/Off On
Spool Activation of spool function.
Select from Disk, Memory, and Off.
If Disk is selected but not
recognized, Memory will be used. Disk/Memory/Off Disk
Max Spool Size The maximum receive buffer size
during spooling.
Can be set in 256KB increments. 512–32768KB 1024KB
Max Receive
Buffer Size The maximum receive buffer size
during non-spooling.
Can be set in 32KB increments. 64–1024KB 256KB
JCL Activation of JCL On/Off On
Print Mode Set the printer language. AUTO/PS*/PCL AUTO
Auto Master
Mode Activation of the automatic browse
master feature.
Not available when WINS server is
designated. On/Off On
Encrypt
Password Activation of the encrypt password
feature. On/Off On
Time Zone Set the time zone in units of
minutes. -720 to
720minutes 0 (GMT –
Greenwich Mean
Time)