Xerox 701P42722_EN User Manual
Page 24
2 Product Overview
24
Xerox CopyCentre/WorkCentre 118 System Administration Guide
•
Password – If a password has been set for a PDF file, specify the password here in
advance. Printing will be performed only when the password set in the PDF file to
be printed matches the password specified here.
•
Collated – Select this to set whether to collate multiple copies of the printout by sets
(sorted in the order of page 1, 2, 3,... 1, 2, 3...).
•
Paper Size – Select the paper size from [A4] or [Auto].
Select [Auto] to print on a paper size that is automatically determined according to
the size and settings of the PDF file to be printed.
PCL
•
Paper Tray – Select the paper tray to be used for printing.
•
Paper Size – Select the paper size to be printed.
•
Bypass Size – Select the paper size for Tray 5 (bypass tray).
•
Orientation – Select the print orientation: [Portrait] or [Landscape].
•
2 Sided Print – Specify whether or not to do double-sided printing. When [On] is
selected, select which edge of paper is to be bound:[Flip on long edge] or [Flip on
short edge].
•
Font – Specify the font used.
•
Symbol Set – Specify the font symbols.
•
Font Size – Specify the font size. You can specify a value between 4.00 and 50.00
in increments of 0.25.
•
Font Pitch – Specify the character spacing. You can specify a value between 6.00
and 24.00 in increments of 0.01.
•
Form Lines – Specify the form line (the number of lines per form). You can specify
a value between 5 and 128 in increments of 1.
•
Quantity – Specify the copies to be printed between 1 to 999.
•
Image Enhancement – Select whether to perform image enhancement. Image
enhancement is a feature that makes the boundary line between black and white
smoother to decrease jags and enhance the visual appearance.
•
HexDump – Specify whether to print the data sent from a PC in the ASCII code
corresponding to the hexadecimal notation format in order to check the data
contents.
•
Draft Mode – Specify whether or not to print in draft mode.
•
Line Termination – Select the line termination from [Off], [Add-LF] (appends a line
feed to carriage return, [Add-CR] (appends a carriage return to line feed and form
feed), or [CR-XX] (appends a carriage return to line feed and form feed, and a line
feed to carriage return)