Regulating sub-register, Table 4.1, Operation status register – Xantrex Technology GPIB-M-XT User Manual
Page 74: Table 4.2
Status Registers
Overview
72
Operating Manual for Multichannel Functionality (GPIB-M)
Table 4.1 OPERation Status Register
REGulating
Sub-Register
This describes the regulating mode. If none of these bits is active, the output
unregulated (UNRegulated) bit is active in the questionable status register.
Table 4.2 REGulating Sub-Register
Bit
Bit Weight Bit Name
Description
0
1
CALibrating
Indicates that the supply is in
CALibration Mode.
1
2
Reserved
Not implemented
2
4
Reserved
Not implemented
3
8
Reserved
Not implemented
4
16
Reserved
Not implemented
5
32
Waiting for TRIGger
Summary
Indicates if the supply is waiting
for a TRIGger.
6
64
Reserved
Not implemented
7
128
Reserved
Not implemented
8
256
REGulating Summary
Reflects the summary of the
REGulating Sub-Register.
9
512
SHUTdown Summary
Reflects the summary of the
SHUTdown Sub-Register.
10
1024
Remote CONtrol
Summary
Reflects the summary of the
Remote CONtrol Sub-Register.
11
2048
Current SHareSummary
Reflects the summary of the
Current Share Sub-Register.
12
4096
Not Used
Not used
13
8192
Reserved
Not implemented
14
16384
PROGram Running
Indicates that an Automated
Sequence is running.
15
32768
Not Used
Not used
Bit
Bit Weight Bit Name
Description
0
1
CV
The power supply is regulating in Constant
Voltage mode.
1
2
CC
The power supply is regulating in Constant
Current mode.